DYTF Parallel Electro-Hydraulic Actuator
HSX DYTF Series parallel foldback electro-hydraulic actuators mount the electric motor and high-pressure hydraulic pump parallel to the cylinder body via a precision integrated manifold block. This foldback geometry significantly reduces overall installation length by up to 40%, delivering massive linear thrust in severely restricted plant spaces where inline actuators cannot fit.
Model Series & Engineering Parameters 6 Standard Models
| Model Series | Rated Thrust (kN) | Rated Speed (mm/s) | Motor Power (kW) | Available Stroke (mm) | Mounting Forms |
|---|---|---|---|---|---|
| DYTF-500 | 5.0 kN | 32 – 80 mm/s | 0.55 kW | 100 – 1,000 mm | Middle Trunnion / Foot Mount |
| DYTF-1000 | 10.0 kN | 25 – 60 mm/s | 1.10 kW | 100 – 1,200 mm | Middle Trunnion / Foot Mount |
| DYTF-2500 | 25.0 kN | 20 – 50 mm/s | 2.20 kW | 150 – 1,800 mm | Middle Trunnion / Front Flange |
| DYTF-5000 | 50.0 kN | 15 – 40 mm/s | 4.00 kW | 200 – 2,200 mm | Heavy Middle Trunnion / Foot Mount |
| DYTF-10000 | 100.0 kN | 12 – 35 mm/s | 5.50 kW | 200 – 2,500 mm | Heavy Middle Trunnion / Flange |
| DYTF-20000+ | 200 – 500 kN | Custom Speeds | 7.5 – 37.0 kW | Up to 3,000 mm | Custom Heavy Engineering Mounting |
Ordering Nomenclature Guide: DYTF - [Rated Thrust in kgf/10] - [Stroke in mm] - [Speed mm/s] - [Mounting: P/S/F/Z] - [Ex/Standard].
Engineered for Restricted Industrial Envelopes
The DYTF parallel foldback configuration solves severe axial clearance limitations while preserving high hydraulic force density and self-contained zero-leakage operation.
Parallel Foldback Geometry
By positioning the electric motor parallel to the cylinder, total axial installation length is reduced by ~40% compared to inline models.
Precision Integrated Manifold
Direct flange mounting eliminates external hydraulic piping and hose lines, ensuring zero risk of hydraulic fluid leaks in sensitive areas.
Bidirectional Hydraulic Locking
Integrated pilot check valves lock the actuator piston firmly in position upon power loss, preventing drift under full mechanical load.
Heavy Plant Environment Protection
Rugged cast and machined components certified for IP65 ingress protection and optional ExdIIBT4 explosive atmosphere compliance.
Proven in Severe Plant Environments
Delivering high thrust and zero-drift actuation across critical heavy industrial facilities.
Power Plants & FGD
Tight damper corridors, flue gas isolation gates, and pulverizer burner tilts.
Steel & Metallurgy
Blast furnace bell controls, tundish car positioning, and slag chute gates.
Cement Works
Kiln inlet dampers, clinker cooler gates, and silo discharge diverters.
Bulk Material Lines
Conveyor deflector chutes, hopper cutoff gates, and tripper car diverters.
Request Technical Quotation & Sizing Proposal
Submit your required parameters, operating duty, or project drawings for DYTF Parallel Electro-Hydraulic Actuator. Our export engineering team will review your specifications and provide an official quotation within 24 hours.